Invited Presentations/Short Courses/Seminars

Invited Speaker at Conferences
  1. A. Shamim, Invited Speaker, IEEE European Microwave Conference (Inter-Society Technology Panel on Biomedical Waves – The Next Breakthrough!) Milan, Italy, 28th September 2022, talk titled "Fully Printed, Wearable Wireless Biomedical Sensors".
  2. M. Vaseem and A. Shamim, Invited Speaker, Materials Challenges in Alternative and Renewable Energy 2022 (MCARE 2022), Busan, South Korea, 23rd August 2022, talk titled "Vanadium dioxide (VO2) Based Metal-Insulator Transition (MIT) Ink for Fully Printed Reconfigurable Devices".
  3. A. Shamim, Invited Speaker, the Fifth Annual International Workshop on Mobile THz Systems (IWMTS), Duisburg-Essen, Germany, July 4th 2022, talk titled "Antenna-on-Chip:The Last Barrier to True RF System-on-Chip".
  4. A. Shamim, Invited Speaker, The 8th International Conference on Antennas and Electromagnetic Systems, Morocco, 24th May 2022, talk titled "Gain and Efficiency Enhancement of mm-Wave On-Chip Antennas Through Artificial Magnetic Conductors".
  5. A. Shamim, Invited Speaker, IEEE IMBioC, China, 18th May 2022, talk titled "Wearable Wireless Biomedical Sensors Realized Through Additive Manufacturing".
  6. A. Shamim, Invited Speaker, Future of Semiconductors Forum, Riyadh KSA, 29th March 2022, talk titled "Design Considerations for CMOS Based Radio Frequency System-on-Chip."
  7. A. Shamim, Invited Speaker, 2022 International Workshop on Antenna & Microwave Technology-Challenges & Opportunities -ISRO Ahmedabad, India, 16th March 2022, talk titled "On-Chip Antennas: The Last Barrier to True RF System-on-Chip".
  8. A. Shamim, Invited Speaker, IEEE International Mobile and Embedded Technology Conference 2022, Noida, India, 10th Mar 2022, talk titled "Flexible, Wearable, Disposable Wireless Communication and Sensing Systems Through Additive Manufacturing".
  9. A. Shamim, Invited Speaker, International Symposium on Advanced Electromagnetic Engineering and Science (ISAEES 2022), South Korea, 9th Feb 2022, talk titled "Additively Manufactured Disposable Wireless Sensors for IoT Applications".
  10. A. Shamim, Keynote Speaker, IEEE International Conference on Microwave, Antennas & Circuits (ICMAC), Pakistan, 21stDec 2021, talk titled, “Microwave Water Cut Sensors for Oil Industry: From Design to Deployment in the Field”.
  11. A. Shamim, Invited Speaker, IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP 2021), Nov 2021, talk titled “Optically Transparent and Flexible FSS and Microwave Absorbers Based on Silver Nanowire Ink”.
  12. A. Shamim, Invited Speaker, Conference on Recent Advancement in RF and Microwave Circuits and Devices, India, April 2021, talk title, “Flexible, Wearable, Disposable Wireless Communication and Sensing Systems Through Additive Manufacturing”.
  13. A. Shamim, Invited Speaker, ATAL-FDP India, Oct 14th 2020, talk titled "Flexible and Wearable Antennas: Recent Advancements, Fabrication Techniques and Applications."
  14. A. Shamim, Plenary Speaker, National Radio Science Conference 2020-Cairo Egypt, Sept 8th 2020, talk titled "Fully Printed Radio Frequency Electronics: Flexible, Wearable and Disposable."
  15. A. Shamim, Invited Speaker, IEEE Radio and Antenna Days in Indian Ocean, Sept 2019 (Reunion Island), talk titled “Additively Manufactured Wireless Sensing Systems”.
  16. A. Shamim, Invited Speaker, 4th International Conference on UK - China Emerging Technologies (UCET), August 2019 (Glasgow, Scotland), talk titled “Flexible, Wearable and Disposable Antenna Systems through Additive Manufacturing for Wireless Sensing Applications”.
  17. H. Zhang, A. Shamim, Invited Paper, IEEE Antennas and Propagation Symposium (APS), July 2019, (Atlanta USA), titled “Gain Enhancement of mm-wave On-chip Antenna through Functional Package”.
  18. A. Shamim, Plenary Speaker, Applied Computational Electromagnetics Symposium (ACES), April 2019 (Miami, Florida), talk titled “Flexible, Wearable and Disposable Antenna Systems through Additive Manufacturing for Wireless Sensing Applications”.
  19. A. Shamim, Invited Speaker, IEEE Workshop on Antenna Challenges in Current & Future Applications 2019, (Cairo, Egypt), titled “Antenna-on-Chip (AoC) and Antenna-in-Package (AIP) Designs for Emerging Wireless Applications”.
  20. A. Shamim, Invited Speaker, IEEE INCAP, Hyderabad, India, Dec 2018, talk titled “Additively Manufactured Flexible and Wearable Antenna Systems”.
  21. H. Zhang, A. Shamim, Invited Paper, IEEE ANTEM, Waterloo Canada, Aug 2018, titled “Gain Enhancement Techniques for MM-Wave On-Chip Antennas on Lossy CMOS Platforms”.
  22. A. Shamim, Invited Speaker, IEEE IEFTC, Ottawa, Canada, Aug 2018, talk titled “Additively Manufactured Flexible and Stretchable Antenna Systems for Wearable Applications”.
  23. A. Shamim, Invited Speaker, IEEE ISAP, Phuket, Thailand, Oct 2017, talk titled “3D Inkjet Printed Flexible and Wearable Antenna Systems”.
  24. A. Shamim, Short Course in IEEE Workshop on Future Directions on Antennas and Sensors Research (FDASR) 2017, (Tunisia), titled “RF SoC and SoP Designs in CMOS and Additively Manufactured Platforms”.
  25. A. Shamim, Workshop in Winter Enrichment Program (WEP) KAUST 2017 (Thuwal, KSA), talk titled “Additive Manufacturing: Creating Bigger, Faster, and Smarter Electronics”.
  26. M. F. Farooqui, A. Shamim, Invited Paper, IEEE IWAT, Athens Greece, March 2017, titled “Low-Cost Inkjet-Printed Wireless Sensor Nodes for Environmental and Health Monitoring Applications”.
  27. M. F. Farooqui, A. Shamim, Invited Paper, International Symposium on Antennas and Propagation (ISAP), Okinawa, Japan, Oct 2016, titled “A 3D Printed Near-Isotropic Antenna for Wireless Sensor Networks”.
  28. A. Shamim, Invited Speaker, IEEE European Microwave Conference (EuMC), London, Oct 2016, titled “Ferrite LTCC Based Reconfigurable Passive Components”.
  29. A. Shamim, Plenary Speaker, IEEE MECAP, Beirut Lebanon, Sept 2016, titled “Inkjet Printed Flexible and Disposable RF Electronics”.
  30. A. Shamim, Invited Speaker, IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), Taipei Taiwan, Aug 2016, titled “On-Chip Antennas: The last barrier to true RF SoC”.
  31. A. Shamim, Invited Speaker, 3rd Saudi International Electronics, Communication and Photonics Conference, April 2015, talk titled “Inkjet Printed RF Electronics”.
  32. M. Nafe, A. Syed, A. Shamim, Invited Paper, IEEE European Conference on Antennas & Propagation (EuCAP), April 2015, titled “Gain Enhancement of Low Profile On-Chip Dipole Antenna Via Artificial Magnetic Conductor at 94 GHz,”.
  33. F. A. Ghaffar, A. Shamim, et.al., Invited Paper, IEEE European Conference on Antennas & Propagation (EuCAP), Hague Netherlands, April 2014 titled “60 GHz System-on-Chip (SoC) with Built-in Memory and an On-chip Antenna”.
  34. A. Shamim, Workshop in IEEE IMS 2014 (Tampa, Florida), talk titled, “Inkjet-Printed Antennas, Passives and Hybrid RF System-on-Package (SoP)”.
  35. A. Shamim, Half Day Course in IEEE APS, 2014, (Memphis, USA), talk titled, “On-Chip Antennas: The Last Barrier to True RF System-on-Chip".
  36. A. Shamim, Short Course in Universität Duisburg-Essen, 2014, (Duisburg-Essen, Germany), talk titled, “On-Chip Antennas: The Last Barrier to True RF System-on-Chip".
  37. M. Arsalan, A. Shamim, et.al., Invited Paper, IEEE Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO), Dec. 2013, titled “Implantable Intraocular Pressure Monitoring systems: Design considerations”.
  38. M. Arsalan, A. Shamim, et.al., Invited Speaker, 26th Symposium on Integrated Circuits Systems Design (SBCCI), Curitiba, Brazil September 2013, titled “A 5.2GHz, 0.5mW RF Powered Wireless Sensor with Dual On-Chip Antennas for Implantable Intraocular Pressure Monitoring”.
  39. A. Shamim, Tutorial in IEEE SBCCI 2013 (Curitiba, Brazil), talk titled “Co-Design of On-Chip Antennas and RF circuits for System-on-Chip Applications”.
  40. A. Shamim, Half Day Course in IEEE IMS 2013 (Seattle, USA), talk titled “Co-Design of On-Chip Antennas and RF circuits for System-on-Chip Applications”.
  41. A. Shamim, Full Day Workshop in IEEE IMS 2013 (Seattle, USA), talk titled “Inkjet Printed RF Electronics”.
  42. A. Shamim, Half Day Course in IEEE EuCAP 2013 (Gothenburg, Sweden), talk titled “Design and Characterization of On-Chip Antennas for System-on-Chip Applications”
  43. A. Shamim, Half-Day Workshop in WEP 2012 (Thuwal, KSA), talk titled “Flexible and Green Electronics for Sensing and Communication Systems”.
  44. A. Shamim, Langis Roy, Invited Talk, IEEE European Microwave Conference, Amsterdam, Netherlands, October 2012, titled “Advances in Multilayer/3D Embedded Components and MCM/SOP Technologies for Challenging Microwave and Mm-wave Wireless Applications”.
 
Invited Seminars in Universities, Research Institutes and Industries
  1. Invited Webinar in Frontiers Science Center for Flexible Electronics (Northwestern Polytechnical University- China), 20th Sept 2022, titled, "Flexible, Wearable, Disposable Wireless Communication and Sensing Systems Through Additive Manufacturing".
  2. Short Course (Webinar) at KACST, Riyadh KSA, 13th Sept 2022, titled "RF SoC: Co-Design of Circuits and Antennas on a Single Chip."
  3. Joint Seminar at University of Texas Dallas and IEEE MTT Chapter Dallas, USA, June 16th 2022, titled "Towards Miniaturized, Flexible and Wearable Wireless Communication and Sensing Systems for IoT Applications".
  4. Seminar at AP/MTT/COM Southern Alberta Section, 17th March 2022, talk titled "On-Chip Antennas: The Last Barrier to True RF System-on-Chip".
  5. Seminar at IEEE MTT/AP Singapore chapter, 28th Sept 2021, titled “Flexible, Wearable, Disposable Wireless Communication and Sensing Systems Through Additive Manufacturing”
  6. Seminar at Tayyaba University, KSA, March 2021, “Research Excellence: Do’s and don’t’s through a personal journey”.
  7. Seminar at Indian Institute of Technology, Kanpur, sponsored by IEEE Antenna and Propagation Society Chapter Uttar Pradesh, India, Sept 2nd 2020, talk titled, “Flexible, Wearable, Disposable Wireless Communication and Sensing Systems Through Additive Manufacturing”.
  8. Seminar at University of Glasgow (Glasgow, Scotland), August 2019, titled, “Fully Printed Wireless Communication and Sensing Systems”.
  9. Seminar at Electrical Engineering Department, Mcmaster University (Hamilton, Canada), July 2019, titled, “Additively Manufactured Flexible, Wearable, Disposable Antennas and Sensors for Wireless Sensing Applications”.
  10. Seminar at Electrical Engineering Department, University of Central Florida (Orlando, USA), Jan 2019, titled, “Wireless Communication and Sensing Systems through Additive Manufacturing”.
  11. Seminar at Printed Electronics Research Lab (PERL) in Texas Instruments, Dallas, USA, Jan 2019, titled, “Research Activities Related to RF Printed Electronics in IMPACT Lab, KAUST”
  12. Seminar at Electrical Engineering Department, University of Ontario Institute of Technology (Oshawa, Canada), 2018, titled, “Additively Manufactured Flexible, Wearable, Disposable Antennas and Sensors for Wireless Sensing Applications”.
  13. Seminar at IEEE AP Chapter in Kingston (Queens University, Kingston, Canada), 2018, titled, “Additively Manufactured Flexible, Wearable, Disposable Antennas and Sensors for Wireless Sensing Applications”.
  14. Seminar at Electrical Engineering Department, Carleton University (Ottawa, Canada), 2018, titled, “Printed RF Electronics”.
  15. Seminar at IEEE AP Chapter in Montreal (Concordia University, Montreal, Canada), 2018, titled, “Additively Manufactured Flexible, Wearable, Disposable Antennas and Sensors for Wireless Sensing Applications”.
  16. Seminar at Electrical Engineering Department, TUFTS University (Boston), 2018, titled, “Flexible, Wearable and Disposable Wireless Sensing Systems Through Additive Manufacturing”.
  17. Research Presentation in Workshop on Perpetual Wireless Sensor Networks in MIT (Boston), 2018, titled “Fractal Rectenna for RF Energy Harvesting”.
  18. Seminar at Electrical Engineering Department, Ho Chi Minh City University of Technology, (Vietnam), 2017, titled, “Flexible, Wearable and Disposable Wireless Sensing Systems Through Additive Manufacturing”.
  19. Seminar at Electrical Engineering Department, National University of Bogota (Colombia), 2017, titled, “Inkjet Printed Flexible and Disposable RF Electronics”.
  20. Seminar at National Research Council (Ottawa, Canada), 2016, titled, “3D and Inkjet Printed RF Electronics”.
  21. Seminar at Electrical Engineering Department, University of Bahrain (Bahrain), 2016, titled, “Additive Manufacturing for RF Electronics”.
  22. Seminar at University of Ontario Institute of Technology, Oshawa, ON Canada, June 2016, titled “Inkjet Printed Flexible and Disposable RF Electronics”.
  23. Seminar at IEEE AP Chapter in Kingston (Royal Military College, Kingston, Canada), 2016, titled, “Inkjet Printed Flexible and Disposable RF Electronics”.
  24. Seminar at Electrical Engineering Department, University of California Los Angeles, (California, USA), 2015, titled, “Inkjet Printed Flexible and Disposable RF Electronics”.
  25. Seminar at Electrical Engineering Department, Purdue University, (West Lafayette, IN, USA), 2015, titled, “RF SoC and SoP: Enabling Platforms for Miniaturized, Low Cost and Flexible Electronics”.
  26. Seminar at Electrical Engineering Department, University of Illinois at Urbana Champaign, (Urbana, Illinois, USA), 2015, titled, “RF SoC and SoP: Enabling Platforms for Miniaturized, Low Cost and Flexible Electronics”.
  27. Seminar at Electrical Engineering Department, Universität Duisburg-Essen, (Germany), 2014, titled, "Inkjet Printed RF Electronics”.
  28. Seminar at Electrical Engineering Department, Nanyang Technological University (Singapore), 2013, titled “RF SoC and SoP: Enabling Platforms for Miniaturized, Low Cost and Flexible Electronics”.
  29. Seminar at Electrical Engineering Department, National University of Singapore (Singapore), 2013, titled “Inkjet Printed RF Electronics”.
  30. Seminar at Lyngsoe Systems (Toronto), 2012, titled “Potential of inkjet-printed Electronics for wearable and flexible RFID solutions”.
  31. Seminar at Department of Electronics, Carleton University (Ottawa), 2012, titled "Overview of Research in IMPACT Lab".
  32. Seminar at Advanced Electronics Company, (Riyadh, KSA), 2011, titled "3D Packaging: A step towards system level miniaturization”.
  33. Seminar at Toshiba research lab, (Bristol, UK), 2011, titled "Advanced RF Electronics: ICs, Antennas and 3D Packaging."
  34. Seminar at Electrical Engineering Department, Berkeley University (San Francisco, USA), 2011, titled “New Trends in RF SoC and SoP Designs”.
  35. Seminar at Prince Sultan Advanced Technologies Research Institution (PSATRI), King Saud University, (Riyadh, KSA), 2011, titled “Research Activities in IMPACT Lab”.
  36. Seminar at Stanford University (Palo Alto, USA), 2010, titled “Wearable Wireless Dosimeter Design for Radiotherapy Applications”.
  37. Seminar at Toshiba Wireless Research Lab (Bristol, UK), 2009, titled “On-Chip and On- Package Antenna, Design, Integration and Characterization”.
  38. Seminar at King Abdul Aziz City of Science & Technology (KACST), (Riyadh, Saudi Arabia), 2009, titled “Wireless Sensors Design Considerations”.
  39. Seminar at Hong Kong University of Science & Technology (Kowloon, Hong Kong), 2009, titled “RF SoC and SoP Design for Wireless Sensor Applications”.
  40. Seminar at National Semiconductors (Santa Clara, USA), 2009, titled “New Trends in RF, Sensors and Packaging Research”