About Mohammad Vaseem Mohammad Vaseem Research Scientist, Integrated Microwaves Packaging Antennas and Circuits Technology tuning chemistry of electronic ink inkjet printed devices sensors Dr. Mohammad Vaseem is a Research Scientist and Lab Manager in the Integrated Microwaves Packaging Antennas and Circuits Technology (IMPACT) Research Group at King Abdullah University of Science and Technology (KAUST) led by Professor Atif Shamim. Research Interests Mohammad's research interests include Tuning Ink chemistry/Ink-formulation based on metal, metal oxide and dielectric materials, Inkjet-Printed devices supported on paper and plastic electronics, Printed transistors, conductors, RFID, and sensors. Book Chapters: • M. Vaseem, Ahmad Umar and Yoon-Bong Hahn, “Zinc Oxide Nanoparticles Articles Related News November 2025 Innovative silver-ink formulation from KAUST IMPACT Lab wins Best Technical Paper Award at IEEE IMAS 2025 3 min read · Wed, Nov 19 2025 Awards News KAUST IMPACT Lab wins Best Technical Paper at IEEE-IMAS 2025 for sustainable, material-efficient 3D printing using custom silver ink. October 2025 IMPACT Lab Team (Vaseem, Hanguang) Wins Best Technical Paper Award at IEEE-IMAS 2025 1 min read · Wed, Oct 29 2025 News IMPACT Lab team has won the Best Technical Paper Award at IEEE International Microwave and Antenna Symposium (IMAS 2025). The paper, first authored by Mohammad Vaseem, and co-authored by Hanguang Liao and Atif Shamim is titled “Additive Manufacturing of RF Components with Stereolithography (SLA) and Silver Ink: A Material Efficient Approach”. This paper presents a novel method for fabricating radio-frequency (RF) components using additive manufacturing. The work highlights a sustainable and material-efficient approach combining SLA-based 3D printing and conductive silver inks and reflects the June 2025 IMPACT Lab Showcases Smart Health Innovations at KCSH 2025 1 min read · Thu, Jun 26 2025 The IMPACT Lab’s Sensors Team proudly participated in the inaugural KAUST Conference on Smart Health (KCSH) held on May 14–15, 2025. With a dedicated booth, the team showcased over five of their latest cutting-edge technologies in the field of smart health, drawing attention from a wide array of researchers, innovators, and industry professionals. As part of the KAUST Innovators: Interactive Technology in Health session, PhD student Firas Fatani and Prof. Atif Shamim had the distinct honor of presenting to HRH Sultan bin Salman Al Saud, along with other distinguished guests. Their March 2024 Dr. Sakandar Rauf's work has been selected as the Cover Article of ACS Nano 1 min read · Sun, Mar 31 2024 News Dr. Sakandar Rauf and research team from Prof Atif Shamim’s group, developed fully screen printed gentle-to-skin wet ECG electrodes integrated with a scaled-down printed circuit board (PCB) packaged inside a 3D-printed antenna-on-package (AoP). This is the first wireless ECG system employing fully screen-printed electrodes developed in Saudi Arabia. The gentle-to-skin wet ECG electrode screen printed on a plastic substrate only require 265 times less metal for the conductive part and 176 times less ECG electrode gel than the standard commercial wet ECG electrodes. In addition, the electrically October 2018 World's first fully printed MIT based Radio Frequency Switch 1 min read · Tue, Oct 16 2018 News RF switch Smartphones, such as the iPhone or Samsung, support different wireless standards, such as GSM, GPS, Wi-Fi, etc., all of which work at different operating frequency bands. June 2018 Revolution in Electronics Ink 1 min read · Sun, Jun 24 2018 News Wireless sensors IoT Our magnetic ink work has been highlighted in Chemical Today Magazine wit the title "Revolution in Electronics Ink" in the digital issue of June 2018. April 2018 Cover Picture for "Advanced Materials Technologies" 1 min read · Fri, Apr 20 2018 News Vaseem magnetic work got highlighted as "Cover Picture" in the April 2018 issue of Advanced Materials Technologies (Wiley Journal). Vaseem's Magnetic work highlighted on KAUST Discovery 1 min read · Fri, Apr 20 2018 News sensors electrical engineering Vaseem's Magnetic work highlighted on KAUST Discovery and also got several media attention in technology websites! Tuning in to magnetic ink 1 min read · Sun, Apr 1 2018 News inkjet printing technologies Radio frequency devices Antennas A new ink containing iron oxide nanoparticles can be turned into fully printed and versatile components for cellular networks. February 2018 Vaseem's magnetic ink based work has been accepted in Advanced Materials Technologies 1 min read · Tue, Feb 6 2018 News inkjet printing magnetic properties Vaseem's work related to magnetic ink development has been published in Advanced Materials Technologies (Wiley Publications). February 2016 100 % acceptance of IMPACT Lab at the Premier Microwave Conference IMS 1 min read · Tue, Feb 2 2016 News Antennas sensors Microwave circuits All four submissions from IMPACT Lab in the leading conference of the microwave community IMS 2016 have been accepted. January 2016 Vaseem and Garret's work on Silver-Organo-Complex ink in ACS Applied Materials and Interfaces 1 min read · Sun, Jan 3 2016 News inkjet printing Inductors Vaseem and Garret's work on Silver-Organo-Complex ink in ACS Applied Materials and Interfaces.
Innovative silver-ink formulation from KAUST IMPACT Lab wins Best Technical Paper Award at IEEE IMAS 2025 3 min read · Wed, Nov 19 2025 Awards News KAUST IMPACT Lab wins Best Technical Paper at IEEE-IMAS 2025 for sustainable, material-efficient 3D printing using custom silver ink.
IMPACT Lab Team (Vaseem, Hanguang) Wins Best Technical Paper Award at IEEE-IMAS 2025 1 min read · Wed, Oct 29 2025 News IMPACT Lab team has won the Best Technical Paper Award at IEEE International Microwave and Antenna Symposium (IMAS 2025). The paper, first authored by Mohammad Vaseem, and co-authored by Hanguang Liao and Atif Shamim is titled “Additive Manufacturing of RF Components with Stereolithography (SLA) and Silver Ink: A Material Efficient Approach”. This paper presents a novel method for fabricating radio-frequency (RF) components using additive manufacturing. The work highlights a sustainable and material-efficient approach combining SLA-based 3D printing and conductive silver inks and reflects the
IMPACT Lab Showcases Smart Health Innovations at KCSH 2025 1 min read · Thu, Jun 26 2025 The IMPACT Lab’s Sensors Team proudly participated in the inaugural KAUST Conference on Smart Health (KCSH) held on May 14–15, 2025. With a dedicated booth, the team showcased over five of their latest cutting-edge technologies in the field of smart health, drawing attention from a wide array of researchers, innovators, and industry professionals. As part of the KAUST Innovators: Interactive Technology in Health session, PhD student Firas Fatani and Prof. Atif Shamim had the distinct honor of presenting to HRH Sultan bin Salman Al Saud, along with other distinguished guests. Their
Dr. Sakandar Rauf's work has been selected as the Cover Article of ACS Nano 1 min read · Sun, Mar 31 2024 News Dr. Sakandar Rauf and research team from Prof Atif Shamim’s group, developed fully screen printed gentle-to-skin wet ECG electrodes integrated with a scaled-down printed circuit board (PCB) packaged inside a 3D-printed antenna-on-package (AoP). This is the first wireless ECG system employing fully screen-printed electrodes developed in Saudi Arabia. The gentle-to-skin wet ECG electrode screen printed on a plastic substrate only require 265 times less metal for the conductive part and 176 times less ECG electrode gel than the standard commercial wet ECG electrodes. In addition, the electrically
World's first fully printed MIT based Radio Frequency Switch 1 min read · Tue, Oct 16 2018 News RF switch Smartphones, such as the iPhone or Samsung, support different wireless standards, such as GSM, GPS, Wi-Fi, etc., all of which work at different operating frequency bands.
Revolution in Electronics Ink 1 min read · Sun, Jun 24 2018 News Wireless sensors IoT Our magnetic ink work has been highlighted in Chemical Today Magazine wit the title "Revolution in Electronics Ink" in the digital issue of June 2018.
Cover Picture for "Advanced Materials Technologies" 1 min read · Fri, Apr 20 2018 News Vaseem magnetic work got highlighted as "Cover Picture" in the April 2018 issue of Advanced Materials Technologies (Wiley Journal).
Vaseem's Magnetic work highlighted on KAUST Discovery 1 min read · Fri, Apr 20 2018 News sensors electrical engineering Vaseem's Magnetic work highlighted on KAUST Discovery and also got several media attention in technology websites!
Tuning in to magnetic ink 1 min read · Sun, Apr 1 2018 News inkjet printing technologies Radio frequency devices Antennas A new ink containing iron oxide nanoparticles can be turned into fully printed and versatile components for cellular networks.
Vaseem's magnetic ink based work has been accepted in Advanced Materials Technologies 1 min read · Tue, Feb 6 2018 News inkjet printing magnetic properties Vaseem's work related to magnetic ink development has been published in Advanced Materials Technologies (Wiley Publications).
100 % acceptance of IMPACT Lab at the Premier Microwave Conference IMS 1 min read · Tue, Feb 2 2016 News Antennas sensors Microwave circuits All four submissions from IMPACT Lab in the leading conference of the microwave community IMS 2016 have been accepted.
Vaseem and Garret's work on Silver-Organo-Complex ink in ACS Applied Materials and Interfaces 1 min read · Sun, Jan 3 2016 News inkjet printing Inductors Vaseem and Garret's work on Silver-Organo-Complex ink in ACS Applied Materials and Interfaces.
Engage ORCID ShareClipboard Related Sites Electrical and Computer Engineering (ECE) Integrated Microwaves Packaging Antennas and Circuits Technology (IMPACTS) Related Content Articles 12 Related Links Also view Publications in the KAUST Repository. Publications on ResearchGate Publications on Orcid Google Scholar Citations
