‌

  1. R. Wang, K. Klionovski, M. Bermudez Arboleda, and A. Shamim "A Quasi-Isotropic Antenna-in-Package with 100% Circular Polarization Coverage" has been accepted for publication in IEEE Antennas and Wireless Propagation Letters.

  2. S. Pazos, Y. Shen, H. Zhang, J. Verdu, A. Fontana, W. Zheng, Y. Yuan, O. Alharbi, Y. Ping, E. Guerrero, L. Acosta, P. Paco, D. Psychogiu, A. Shamim, D. Akinwande, and M. Lanza, “Memristive circuits based on two-dimensional layered hexagonal boron nitride for radiofrequency and millimetre wave applications,”  has been accepted for publication in Nature Electronics.

  3. L. Kong, W. Li, T. Zhang, H. Ma, Y. Cao, K. Wang, Y. Zhou, A. Shamim, L. Zheng, X. Wang, W. Huang, "Wireless Technologies in Flexible and Wearable Sensing: from Materials Design, System Integration to Applications" has been accepted for publication in Advanced Materials.

  4. S Rauf, RM Bilal, J Li, M Vaseem, AN Ahmad, A Shamim, "Fully Screen-Printed and Gentle-to-Skin Wet ECG Electrodes with Compact Wireless Readout for Cardiac Diagnosis and Remote Monitoring", ACS Nano, 2024 (doi: 10.1021/acsnano.3c12477).

  5. H. Zhang, Y. Yu, I. Getmanov, and A. Shamim, "Challenges and Solutions Related to Probe-Fed Millimeter-Wave and Sub-Terahertz Antenna Measurements" has been accepted for publication in IEEE Antenna and Propagation Magzine, Jan 2024

  6. R. Wang, Y. Yang, B. Makki, and A. Shamim, "A Wideband Reconfigurable Intelligent Surface for 5G Millimeter-Wave Applications" in IEEE Transactions on Antennas and Propagation, vol. 72, no. 3, pp. 2399-2410, March 2024, doi: 10.1109/TAP.2024.3352828.

  7. H. Wang, M. Chen, Y. Yang, Y. Ma, L. Luo, C. Liu, I. Getmanov, T. D. Anthopoulos, X. Zhang, A. Shamim, “A Graphene Geometric Diode with the Highest Asymmetry Ratio and Three States Gate-Tunable Rectification Ability,” has been accepted for publication in Adv. Electron. Mater. Dec. 2023, 2300695. doi: 10.1002/aelm.202300695

  8. H. Zhang and A. Shamim, "Wideband and Wide Beam Scanning Dual-Polarized Phased Array Antenna-in-Package Design for 5G Applications," has been accepted for publication in IEEE Open Journal of Antennas and Propagation, November, 2023.

  9. R. Wang, K. Klionovski and A. Shamim, "Theory and Design of a 3D Antenna with Wideband Radiation Isotropy," in IEEE Transactions on Antennas and Propagation, vol. 72, no. 1, pp. 986-991, Jan. 2024, doi: 10.1109/TAP.2023.3330013.

  10. A. Alam, M. S. Alam, K. Almuhanna, H. Zhang, A. Shamim and Z. A. Shamsan, "A Wideband Transition Design Technique From RWG to SIW Technologies," in IEEE Access, vol. 11, pp. 109539-109552, 2023.

  11. B. A. Minyawi, M. Vaseem, N. A. Alhebshi, A. M. AlAmri, and A. Shamim, "Printed Electrodes Based on Vanadium DIoxide and Gold Nanoparticles for Asymmetric Supercapacitors," in Nanomaterials, Nanomaterials 2023, 13, 2567.

  12. Z. Iman, Z. Akhter, Y. Yu and A. Shamim, "Post-Fabrication Technique to Manage Material Variations in 3-D Printed Microstrip Antenna Substrates," in IEEE Open Journal of Antennas and Propagation, vol. 4, pp. 571-580, 2023.

  13. Q. Abdullahi, M. Vaseem, A. Shamim, G. Goussetis and D. E. Anagnostou, "Modeling Phase Changing Property of VO2 for Reconfigurable Microwave Frequency Selection Applications via Time-Resolved Microwave Conductivity," in IEEE Access, vol. 11, pp. 43793-43804, 2023.

  14. R. Wang, K. Klionovski and A. Shamim, "Fully Printed 3-D Antennas With Wideband Radiation Isotropy Based on Annular Currents Models," in IEEE Open Journal of Antennas and Propagation, vol. 4, pp. 484-491, 2023.

  15. N. K. Roy, F. A. Ghaffar, and A. Shamim, "A Single Layer Wideband Vivaldi Antenna with a Novel Feed Structure," in IET Microwaves, Antennas & Propagation, 17(7), 558–564 (2023).

  16. X. Zou, Y. Yang, U. Yaqoob, A. Shamim, K. N. Salama and H. Fariborzi, "A Mechanical Memory With Capacitance Modulation of Nonlinear Resonance," in IEEE Electron Device Letters, vol. 44, no. 6, pp. 923-926, June 2023.

  17. T. Singh, G. Hummel, M. Vaseem and A. Shamim, "Recent Advancements in Reconfigurable mmWave Devices Based on Phase-Change and Metal Insulator Transition Materials," in IEEE Journal of Microwaves, vol. 3, no. 2, pp. 827-851, April 2023.

  18. R. Wang, Z. Akhter, W. Li and A. Shamim, "Fully Printed Dual-Layer Depolarizing Chipless RFID Tag for Wearable Applications," in IEEE Journal of Radio Frequency Identification, vol. 7, pp. 74-82, 2023.

  19. A. Kaidarova, N. R. Geraldi, R. P. Wilson, J. Kosel, M. G. Meekan, V. M. Eguíluz, M. M. Hussain, A. Shamim, H. Liao, M. Srivastava, S. S. Saha, M. S. Strano, X. Zhang, B. S. Ooi, M. Holton, L. W. Hopkins, X. Jin, X. Gong, F. Quintana, A. Tovasarov, A. Tasmagambetova, and C. M. Duarte, "Wearable sensors for monitoring marine environments and their inhabitants," in Nature Biotechnology, 41,1208–1220 (2023).

  20. Park, E., Li, W., Jung, H., Lee, M., Park, J.-H., Shamim, A., Lim, S., Highly Scalable, Flexible, and Frequency Reconfigurable Millimeter-Wave Absorber by Screen Printing VO2 Switch Array onto Large Area Metasurfaces. in Advanced Materials Technologies. 2023, 8, 2201451.

  21. U. Myrzakhan, F. A. Ghaffar, M. Vaseem, H. Fariborzi and A. Shamim, "Inkjet-Printed Ferrite Substrate-Based Vialess Waveguide Phase Shifter," in IEEE Transactions on Magnetics, vol. 59, no. 4, pp. 1-12, April 2023.

  22. Y. Yu, Z. Akhter and A. Shamim, "Improving the Performance of Antenna-on-Chip by Effectively Illuminating the Artificial Magnetic Conductors Through Coupling Enhancement Structures," in IEEE Transactions on Antennas and Propagation, vol. 71, no. 5, pp. 4492-4497, May 2023.

  23. A. Bakytbekov and A. Shamim, "Synergistic Multi-Source Ambient RF and Thermal Energy Harvester for Green IoT Applications," in Energy Reports, Volume 9, Pages 1875-1885, 2023.

  24. O. Sokunbi, H. Attia, A. Hamza, A. Shamim, Y. Yu and A. A. Kishk, "New Self-Isolated Wideband MIMO Antenna System for 5G mm-Wave Applications Using Slot Characteristics," in IEEE Open Journal of Antennas and Propagation, vol. 4, pp. 81-90, 2023.

  25. Abdullahi, Q.; Dzipalski, A.; Raguenes, C.; Sepulveda, N.; Jose, G.; Shanim, A.; Goussetis, G.; Hand, D.; Anagnostou, D.E. Use of Thermochromic Properties of VO2 for Reconfigurable Frequency Selection. Electronics 2022, 11, 4099.

  26. F. Fatani, M. Vaseem, Z. Akhter, R. M. Bilal and A. Shamim, "Remote Monitoring of Skin Temperature Through a Wristband Employing a Printed VO Sensor," in IEEE Sensors Journal, vol. 23, no. 1, pp. 169-180, 1 Jan.1, 2023.

  27. K. Klionovski, H. Liao, S. E. Bankov, Z. Akhter and A. Shamim, "A Planar SIW-Based Mm-Wave Frequency-Scanning Slot Antenna Array With No Scan Blindness at Normal," IEEE Transactions on Antennas and Propagation, vol. 71, no. 1, pp. 563-569, Jan. 2023.

  28. M. Vaseem, Z. Akhter, W. Li, E. Yarali, T. Anthopoulos, and A. Shamim, "High-Conductivity Screen-Printable Silver Nanowire Ink for Optically Transparent Flexible Radio Frequency Electronics" in IOP Flexible and Printed Electronics, 2022,7, No.044001.

  29. N.A. Alhebshi, M. Vaseem, B.A. Minyawi, A.M. AlAmri, A. Shamim, Single and double layer of monoclinic VO2 ink-based printed and interdigitated supercapacitors, Energy Technol. (2022) 2200432, doi: 10.1002/ente.202200432.

  30. Z. Akhter, R. M. Bilal, K. Telegenov, E. Feron and A. Shamim, "Indigenously Developed HD Video Transmission System for UAVs Employing a 3 × 3 MIMO Antenna System," in IEEE Open Journal of Antennas and Propagation, vol. 3, pp. 940-947, 2022.

  31. M. Bermudez Arboleda, K. Klionovski, S. Zhen and A. Shamim, "Orientation Aware Intelligent 3-D Cubic Antenna System With Automated Radiation Pattern Reconfigurability," in IEEE Open Journal of Antennas and Propagation, vol. 3, pp. 812-823, 2022.

  32. K. Loganathan, H. Faber, E. Yengel, A. Seitkhan, A. Bakytbekov, E. Yarali, B. Adilbekova, A. Albatati, Y. Lin, Z. Felemban, S. Yang, W. Li, D. G. Georgiadou, A. Shamim, E. Lidorikis, and T. D. Anthopoulos, "Rapid and up-Scalable Manufacturing of Gigahertz Nanogap Diodes," in Nature Communication, 13, 3260 (2022).

  33. Z. Su, K. Klionovski, H. Liao, W. Li and A. Shamim, "A Fully-Printed 3D Antenna With 92% Quasi-Isotropic and 85% CP Coverage," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 9, pp. 7914-7922, Sept. 2022.

  34. Humaira Zafar, Yanfen Zhai, Juan E. Villegas, Florent Ravaux, Kenneth L. Kennedy, Mauro F. Pereira, Mahmoud Rasras, Atif Shamim, and Dalaver H. Anjum, "Compact broadband ( O, E, S, C, L & U bands) silicon TE-pass polarizer based on ridge waveguide adiabatic S-bends," Opt. Express 30, 10087-10095 (2022)

  35. Z. Y. Lopez, Z. Akhter and A. Shamim, "3D Printed RFID Tag Antenna Miniaturized Through Volumetric Folding and Slow-Wave Structures," in IEEE Journal of Radio Frequency Identification, vol. 6, pp. 164-175, 2022.

  36. A. Bakytbekov, T. Q. Nguyen, G. Zhang, M. S. Strano, K. N. Salama and A. Shamim, "Dual-Function Triple-Band Heatsink Antenna for Ambient RF and Thermal Energy Harvesting," in IEEE Open Journal of Antennas and Propagation, vol. 3, pp. 263-273, 2022.

  37. H. Abutarboush, W. Li, M. Vaseem, and A. Shamim, "Compact Flexible and Reconfigurable Antenna Using Screen-printed VO2 Switch for WLAN and 5G Electronic Devices," in International Journal of RF and Microwave Computer-Aided Engineering, 2022.

  38. Y. Yu, Z. Akhter and A. Shamim, "Ultra-Thin Artificial Magnetic Conductor for Gain Enhancement of Antenna-on-Chip," in IEEE Transactions on Antennas and Propagation, vol. 70, no. 6, pp. 4319-4330, June 2022.

  39. W. Li, Z. Akhter, M. Vaseem, and A. Shamim, "Optically Transparent and Flexible Radio Frequency Electronics through Printing Technologies," in Advanced Materials Technologies, vol. 7, no. 6, p. 2101277, Jun. 2022.

  40. H. Liao and A. Shamim, "A Low-Profile and High-Aperture-Efficiency Hexagonal Circularly Polarized Microstrip Antenna Array," in IEEE Antennas and Wireless Propagation Letters, vol. 21, no. 3, pp. 615-619, March 2022.

  41. H. Zhang, Y. Yang, J. Zhou, and A. Shamim, "Wearable radar system design on semi-flexible PCB for visually impaired people," in Frontiers in Communications and Networks, vol. 2, pp. 1–12, Jan. 2022.

  42. S. Yang, A. Khusro, M. Vaseem, W. Li, M. Hashmi, A. Shamim, "Optimization of ANN-based Models and its EM Co-simulation for Printed RF Devices," in International Journal of RF and Microwave Computer-Aided Engineering, Nov 2021.

  43. Z. Akhter, R. M. Bilal, and A. Shamim, "A Dual mode, Thin and Wideband MIMO Antenna System for Seamless Integration on UAV," in IEEE Open J. Antennas Propag, Sep. 2021.

  44. H. Wang, G. Jayaswal, G. Deokar, J. Stearns, P. Costa, G. Moddel, and A. Shamim, "CVD-Grown Monolayer Graphene Based Geometric Diode for THz Rectennas," in Nanomaterials, vol. 11, no. 8, pp. 1986-1995, Aug. 2021, doi: 10.3390/nano11081986.

  45. W. Li, H. Zhang, S. Kagita, and A. Shamim, "All Screen-Printed, Polymer-Nanowire based Foldable Electronics for mm-Wave Applications," has been accepted for publication in Advanced Materials Technologies, July 2021, doi: 10.1002/admt.202100525. (Cover Article)

  46. Z. Su, K. Klionovski, H. Liao, Y. Chen, A. Elsherbeni, and A. Shamim, "3D Antenna-on-Package Design: Achieving Near-Isotropic Radiation Pattern and Wide CP Coverage Simultaneously," in IEEE Transaction on Antennas and Propagation, vol. 69, no. 7, pp. 3740-3749, July 2021, doi: 10.1109/TAP.2020.3044134.

  47. A. Ghalib, M. Sharawi, R. Mittra, H. Attia, and A. Shamim, "Collocated MIMO Traveling wave SIW Slot Array Antennas for Millimeter Waves," in IET Microwave Antennas and Propagation, vol. 15, no. 8, pp. 815-826, July 2021, doi:10.1049/mia2.12110.

  48. M. A. Karimi, M. Arsalan, and A. Shamim, "Extended throat venturi based flow meter for optimization of oil production process," in IEEE Sensors Journal, vol. 21, no. 16, pp. 17808-17816, May 2021, doi: 10.1109/JSEN.2021.3083532.

  49. S. Yang, W. Li, M. Vaseem, and A. Shamim, "Additively Manufactured Dual-Mode Reconfigurable Filter Employing VO2-Based Switches," in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 10, no. 10, pp. 1738 - 1744, Oct 2020, doi: 10.1109/TCPMT.2020.3019067.

  50. Y. Yang, W. Li, K. Salama, and A. Shamim, "Polarization Insensitive and Transparent Frequency Selective Surface for Dual Band GSM Shielding," in IEEE Transaction on Antennas and Propagation, vol. 69, no. 5, pp. 2779-2789, Oct 2020, doi: 10.1109/TAP.2020.3032827.

  51. H. F. Abutarboush, W. Li, and A. Shamim, "Flexible-Screen-Printed Antenna with Enhanced Bandwidth by Employing Defected Ground Structure," in IEEE Antennas and Wireless Propagation Letters, vol. 19, no. 10, pp. 1803-1807, Oct 2020, doi: 10.1109/LAWP.2020.3019462.

  52. W. Li, M. Vaseem, S. Yang, and A. Shamim, "Flexible and Reconfigurable Radio Frequency Electronics Realized by High-Throughput Screen Printing of Vanadium Dioxide Switches," in Nature-Microsystems & Nanoengineering, vol. 6, no. 77, pp. 1-12, Oct 2020, doi: 10.1038/s41378-020-00194-2.

  53. R. Hussain, M. U. Khan, N. Iqbal, E. AlMajali, S. S Alja'Afreh, U. Johar, A. Shamim, and M. S. Sharawi, "Frequency Agile MIMO Antenna Design for 5G Dynamic Spectrum Sharing in CR Networks," in Microwave and Optical Technology Letters, vol. 63 no. 3 pp. 889-894, March 2021, doi: 10.1002/mop.32668.

  54. K. Klionovski, S. Bankov, and A. Shamim, "Synthesis of Reflectors Characterized by the Spatial Dispersion of the Reflection Coefficient," in IEEE Open Journal of Antennas and Propagation, vol. 1, pp. 419-425, Aug 2020, doi: 10.1109/OJAP.2020.3016425.

  55. S. Mikki, M. A. Karimi, A. Shamim, and Y. Antar, "Slot Antenna Array Synthesis Using the Infinitesimal Dipole Model Technique: Theory and Experiment," in International Journal of RF and Microwave Computer-Aided Engineering, vol. 30, no. 11, pp. 1-15, Aug 2020, doi: 10.1002/mmce.22402.

  56. A. Bakytbekov, N. Thang, W. Li, A. L. Cottrill, G. Zhang, M. Strano, K. Salama, and A. Shamim, "Multi-Source Ambient Energy Harvester Based on RF and Thermal Energy: Design, Testing, and IoT Application," in Energy Science and Engineering, vol. 8, no. 11, pp. 3883-3897, Nov 2020, doi: 10.1002/ese3.784.

  57. W. Li, E. Yarali, A. Bakytbekov, T. Anthopoulos, and A. Shamim, "Highly Transparent and Conductive Electrodes Enabled by Scalable Printing-and-Sintering of Silver Nanowires," in Nanotechnology, vol. 31, no. 39, pp. 395201-395209, July 2020, doi: 10.1088/1361-6528/ab9c53.

  58. Y. Shao, J.H. Fu, Z. Cao, K. Song, R. Sun, Y. Wan, A. Shamim, L. Cavallo, Y. Han, R. B. Kaner, and V. C. Tung, "3D Crumpled Ultra-Thin 1T MoS2 for Inkjet Printing of Mg-Ion Asymmetric Micro-Supercapacitors," in ACS NANO, vol. 14, no. 6, 7308–7318, pp. 7308-7318, June 2020, doi: 10.1021/acsnano.0c02585.

  59. H. Zhang and A. Shamim, "Gain Enhancement of Millimeter-Wave on-Chip Antenna through an Additively Manufactured Functional Package," in IEEE Transaction on Antennas and Propagation, vol. 68, no. 6, pp. 4344-4353, June 2020, doi: 10.1109/TAP.2020.2975276.

  60. A. Meredov, K. Klionovski, and A. Shamim, "Screen-Printed, Flexible, Parasitic Beam-Switching Millimeter-Wave Antenna Array for Wearable Applications," in IEEE Open J. Antennas Propag., vol. 1, pp. 2-10, Nov. 2019, doi: 10.1109/OJAP.2019.2955507.

  61. W. Li, A Meredov, and A. Shamim, "Coat-and-Print Patterning of Silver Nanowires for Flexible and Transparent Electronics," in npj Flexible Electronics, vol. 3, no. 19, pp. 1-7, Dec 2019, doi: 10.1038/s41528-019-0063-3.

  62. J. Ming, Z. Cao, Y. Wu, W. Wahyudi, W. Wang, X. Guo, L. Cavallo, JY. Hwang, A. Shamim, LJ. L, YK. Sun, and H. Alshareef, "New Insight on the Role of Electrolyte Additives in Rechargeable Lithium-Ion Batteries", in ACS Energy Letters, vol. 4, no. 11, pp. 2613-2622, Oct. 2019, doi:10.1021/acsenergylett.9b01441.

  63. M. A. Karimi, Q. Zhang, Y. Kuo, S. F. Shaikh, A. Kaidarova, N. Geraldi, M. Hussain, J. Kosel, C. Duarte, and A. Shamim, "Flexible tag design for semi-continuous wireless data acquisition from marine animals," in Flexible and Printed Electronics, vol. 4, no. 3, pp. 035006-035014, Sep. 2019, doi: 10.1088/2058-8585/ab423f.

  64. H. Liao, Q. Zhang, M. A.Karimi, Y. Kuo, N. Mishra, and A. Shamim, "An Additively Manufactured 3D Antenna-in-Package with Quasi-Isotropic Radiation for Marine Animals Monitoring System", in IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 11, pp. 2384-2388, Aug 2019, doi: 10.1109/LAWP.2019.2937507.

  65. W. Li, S. Yang, and A. Shamim, "Screen-Printing of Silver Nanowires: Balancing Conductivity with Transparency While Maintaining Flexibility, and Stretchability", in npj Flexible Electronics, vol. 3, no. 13, pp. 1-8, July 2019, doi: 10.1038/s41528-019-0057-1.

  66. R. Hussain, A. Raza, U. Khan, A. Shamim, and M. Sharawi, "Miniaturized Frequency Reconfigurable Pentagonal MIMO Slot Antenna for Interweave CR Applications," in International Journal of RF and Microwave Computer-Aided Engineering, vol. 29, no. 9, pp. 1-12, April 2019, doi:10.1002/mmce.21811.

  67. A. M. AlAmri, M. Vaseem, S. F. Leung, A. Shamim, and J. He, "Fully Inkjet-Printed Photodetector Using a Graphene/Perovskite/Graphene Heterostructure," in IEEE Transactions on Electron Devices, vol. 66, no. 6, pp. 2657-2661, June 2019, doi: 10.1109/TED.2019.2911715.

  68. F. A. Ghaffar, J. Bray, M. Vaseem, L. Roy, and A. Shamim, "Theory and Design of Tunable Full-Mode and Half-Mode Ferrite Waveguide Isolators," in IEEE Transactions on Magnetics, vol. 55, no. 8, pp. 1-8, Aug. 2019, doi: 10.1109/TMAG.2019.2910028.

  69. M. S. Khan, A. Meredov, F. A. Tahir, H. Chema, and A. Shamim, "A W-band EBG backed Double Rhomboid Bowtie-Slot On-chip Antenna," in IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 5, pp. 1046-1-50, May 2019, doi: 10.1109/LAWP.2019.2908891.

  70. O. Sanusi, F. A. Ghaffar, A. Shamim, M. Vaseem, Y. Wang, and L. Roy, "Development of 2.45 GHz Antenna for Flexible Compact Radiation Dosimeter Tags," in IEEE Transaction on Antennas and Propagation, vol. 67, no. 8, pp. 5063-5072, Aug. 2019. doi: 10.1109/TAP.2019.2911647.

  71. M. A. Karimi, M. Arsalan and A. Shamim, "Multi-channel, microwave-based, compact printed sensor for simultaneous and independent level measurement of eight liquids," in IEEE Sensors Journal, vol. 19, no. 14, pp. 5611-5620, July 2019, doi: 10.1109/JSEN.2019.2904648.

  72. M. Vaseem, S. Zhen, S. Yang, W. Li, and A. Shamim, "Development of VO2 Nanoparticles Based Metal-Insulator Transition Electronic Ink", in Advanced Electronic Materials, vol. 5, no. 5, pp. 1800949- 1800959, March 2019, doi: 10.1002/aelm.201800949.

  73. K. Klionovski, M. Sharawi, and A. Shamim, "A dual-polarization Switched Beam Patch Antenna Array for Millimeter-Wave Applications," published in IEEE Transaction on Antennas and Propagation, vol. 67, no. 5, pp. 3510-3515, May 2019, doi: 10.1109/TAP.2019.2900438.

  74. A. Cottrilla, G. Zhang, A. T. Liu, A. Bakytbekov, K. S. Silmore, V. B. Koman, and A. Shamim; M. S. Strano, "Persistent energy harvesting in the harsh desert environment using a thermal resonance device: Design, testing, and analysis", in Applied Energy, vol. 235, pp. 1514-1523, Feb. 2019, doi: 10.1016/j.apenergy.2018.11.045.

  75. M. Tayyab, M. Sharawi, A. Shamim, and A. Al-Sarkhi, "A Low Complexity RF Based Sensor Array for Lung Disease Detection using Inkjet Printing" in International Journal of RF and Microwave Computer-Aided Engineering, vol. 29, no. 4, pp. 1-12, Oct 2018, doi: 10.1002/mmce.21586.

  76. A. Bakytbekov, T. Nguyen, C. Huynh, K. Salama, and A. Shamim, "Fully Printed 3D Cube-shaped Multiband Fractal Rectenna for Ambient RF Energy Harvesting" in Nano Energy, vol. 53, pp. 587-595, Nov. 2018, doi: 10.1016/j.nanoen.2018.09.022.

  77. S. Yang, M. Vaseem, and A. Shamim, "Fully Inkjet-Printed VO₂-Based Radio-Frequency Switches for Flexible Reconfigurable Components", in Advanced Materials Technologies, vol. 4, no. 1, pp. 1800276- 1800286 Sep. 2018, doi: 10.1002/admt.201800276.

  78. H. Aboutarboush and A. Shamim, "A Reconfigurable Inkjet-Printed Antenna on Paper Substrate for Wireless Applications," in IEEE Antennas and Wireless Propagation Letters, vol. 17, no. 9, pp. 1648-1651, Sep. 2018, doi: 10.1109/LAWP.2018.2861386.

  79. M. Ikran, M. S. Sharawi, and A. Shamim, "Compact Circular Connected Monopole Antenna Arrays for Wideband MIMO Applications," in IET Microwaves, Antennas & Propagation, vol. 12, no. 13, pp. 2122-2127, Oct. 2018, doi: 10.1049/iet-map.2018.5071.

  80. F. A. Ghaffar, M. Vaseem, and A. Shamim, "Design and Fabrication of a Frequency and Polarization Reconfigurable Microwave Antenna on a Printed Partially Magnetized Ferrite Substrate", in IEEE Transactions on Antennas and Propagation, vol. 66, no. 9, pp. 4866-4871, Sep. 2018, doi: 10.1109/TAP.2018.2846796.

  81. R. Hussain, M. S. Sharawi and A. Shamim, "4-Element Concentric Pentagonal Slot-Line-Based Ultra-Wide Tuning Frequency Reconfigurable MIMO Antenna System", in IEEE Transactions on Antennas and Propagation, vol. 66, no. 8, pp. 4282-4287, Aug. 2018, doi: 10.1109/TAP.2018.2839970.

  82. A. Kaidarova, M. A. Khan, S. Amara, N. Geraldi, M. A. Karimi, A. Shamim, R. P. Wilson, C. M. Duarte, and J. Kosel "Tunable, Flexible composite magnets for marine monitoring applications", in Advanced Engineering Materials, vol. 20, no. 9, pp. 1800229- 1800236, Sep. 2018, doi: 10.1002/adem.201800229.

  83. M. Al-Tarifi, M. Sharawi, and A. Shamim, "A Massive MIMO Antenna System for 5G Base Stations with Directive Ports and Switched Beamsteering Capabilities," in IET Microwaves, Antennas & Propagation, vol. 12, no. 10, pp. 1709-1718, Aug. 2018, doi: 10.1049/iet-map.2018.0005.

  84. Z.Su, K. Klionovski, R.M.Bilal, and A.Shamim, "A Dual-Band Additively Manufactured 3D Antenna on Package with Near-Isotropic Radiation Pattern" in IEEE Transactions on Antennas and Propagation, vol. 66, no. 7, pp. 3295-3305 July 2018, doi: 10.1109/TAP.2018.2823729.

  85. M.Ikram, M. Sharawi, A. Shamim, and A. Sebak, "A Multiband Dual-Standard MIMO Antenna System based on Monopoles (4G) and Connected slots (5G)For Future Smart Phones," in Microwave and Optical Technology Letters, vol. 60, no. 6, pp. 1468-1476, June 2018, doi: 10.1002/mop.31180.

  86. M. Vaseem, F. A. Ghaffar, M.F. Farooqui, and A. Shamim, "Iron Oxide Nanoparticle-Based Magnetic Ink Development for Fully Printed Tunable Radio-Frequency Devices" in Advanced Materials Technologies, vol. 3, no. 4, pp. 1700242- 1700252, April 2018, doi: 10.1002/admt.201700242.

  87. M. Ikram, K. Klionovski, A. Shamim, and M. Sharawi, "A Switched-Beam Millimeter-Wave Array with MIMO Configuration for 5G Applications," in Microwave and Optical Technology Letters, vol. 60, no. 4, pp. 915-920, April 2018, doi: 10.1002/mop.31076.

  88. R. Hussain, A. Shamim, and M.Sharawi, "An integrated 4 -element slot-Based MIMO and UWB Sensing Antenna system for CR Platforms", in IEEE Transactions on Antennas and Propagation, vol. 66, no. 2, pp. 978-983, Feb. 2018, doi: 10.1109/TAP.2017.2781220.

  89. K. Klionovski and A. Shamim, "Physically Connected Stacked Patch Antenna Design with 100% Bandwidth," in IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 3208-3211, Nov 2017, doi: 10.1109/LAWP.2017.2768599.

  90. G. Jayaswal, A. Belkadi, A. Meredov, B. Pelz, G. Moddel, and A. Shamim, "Optical Rectification Through an Al2O3 Based MIM Passive Rectenna at 28.3 THz", in Materials Today Energy, vol. 7, pp. 1-9, March 2018, doi: 10.1016/j.mtener.2017.11.002.

  91. M. Ikram, M. Sharawi, and A. Shamim, "A Novel Very Wideband Integrated Antenna System for 4G and 5G mm-Wave Applications", in Microwave and Optical Technology Letters, vol. 59, no. 12, pp. 3082-3088, Dec. 2017, doi: 10.1002/mop.30879.

  92. M. Nafe, A. Syed, and A. Shamim, "Gain Enhanced On-Chip Folded Dipole Antenna Utilizing Artificial Magnetic Conductor at 94 GHz", in IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 2844 - 2847, Sep. 2017, doi: 10.1109/LAWP.2017.2749308.

  93. A. A. Khan, G. Jayaswal, F. A. Ghaffar, and A. Shamim, "Metal-Insulator-Metal Diodes with sub-nm Surface Roughness for Energy Harvesting Application", in Journal of Microelectronic Engineering, vol. 181, pp. 34-42, Sep. 2017, doi: 10.1016/j.mee.2017.07.003.

  94. K. Klionovski and A. Shamim, "Back Radiation Suppression through a Semitransparent Ground Plane for an mm-Wave Patch Antenna", in IEEE Transactions on Antennas and Propagation, vol. 65, no. 8, pp. 3935-3941, June 2017, doi: 10.1109/TAP.2017.2717967.

  95. B. Krykpayev, M. F Farooqui, R. M. Bilal, M. Vaseem, and A. Shamim, "A Wearable Tracking Device Inkjet-Printed on Textile", in Microelectronics Journal, vol. 65, pp. 40-48, July 2017, doi: 10.1016/j.mejo.2017.05.010.

  96. G. McKerricher, R. Maller, M. Vaseem, M. McLachlan, and A. Shamim, "Inkjet-Printed Thin Film Radio-Frequency Capacitors Based on Sol-gel Derived Alumina Dielectric Ink", in Ceramics International, vol. 43, no. 13, pp. 9846-9853, Sep. 2017, doi: 10.1016/j.ceramint.2017.04.167.

  97. M. A. Karimi, M. Arsalan, and A. Shamim, "Design and dynamic characterization of an orientation insensitive microwave water-cut sensor," in IEEE Transactions on Microwave Theory and Techniques, vol. 66, no. 1, pp. 530-539, June 2017, doi: 10.1109/TMTT.2017.2708708.

  98. M. F. Farooqui, M. A. Karimi, K. N. Salama, and A. Shamim, "3D-Printed Disposable Wireless Sensors with Integrated Microelectronics for Large Area Environmental Monitoring", in Advanced Materials Technologies, vol. 2, no. 8, pp. 1700051-1700059, Aug. 2017, doi: 10.1002/admt.201700051.

  99. M. A. Karimi, M. Arsalan and A. Shamim, "Dynamic Characterization of a Low-Cost Microwave Water-Cut Sensor in a Flow Loop," in Sensors and Actuators A: Physical, vol. 260, pp. 146-152, June 2017, doi: 10.1016/j.sna.2017.03.016.

  100. M. S. Sharawi, M. Ikram and A. Shamim, "A Two Concentric Slot Loop Based Connected Array MIMO Antenna System for 4G/5G Terminals," in IEEE Transactions on Antennas and Propagation, vol. 65, no. 12, Dec. 2017, doi: 10.1109/TAP.2017.2671028.

  101. G. McKerricher, M. Vaseem and A. Shamim, "Fully Inkjet-Printed Microwave Passive Electronics," in Nature Microsystems and Nanoengineering, vol. 3, pp. 16075-16081, Jan. 2017, doi: 10.1038/micronano.2016.75.

  102. A. Quddious, S. Yang, M. M. Khan, F. A. Tahir, A. Shamim, K. N. Salama and H. M. Cheema, "Disposable, Paper-Based, Inkjet-Printed Humidity and H2S Gas Sensor for Passive Sensing Applications", in MDPI Sensors, vol. 16, no. 12, pp. 2073-2085, Dec. 2016, doi: 10.3390/s16122073.

  103. A. Nafe, F. A. Ghaffar, M. F. Farooqui and A. Shamim, "A Ferrite LTCC-Based Monolithic SIW Phased Antenna Array", in IEEE Transactions on Antennas and Propagation, vol. 65, no. 1, pp. 196-205, Nov. 2016, doi: 10.1109/TAP.2016.2630502.

  104. M. F Farooqui and A. Shamim, "3D Inkjet-Printed Helical Antenna with Integrated Lens", in IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 800-803, Aug. 2016, doi: 10.1109/LAWP.2016.2604497.

  105. M. A. Karimi, M Arsalan, and A. Shamim, "Low cost and pipe conformable microwave-based water cut sensor", in IEEE Sensors Journal, vol. 16, no. 21, pp. 7636-7645, Aug. 2016, doi: 10.1109/JSEN.2016.2599644.

  106. D. Conchouso, G. McKerricher, A. A. A. Carreno, D. Castro, A. Shamim, and I. G. Foulds, " Comparison of Capacitive and Radio Frequency Resonator Sensors for Monitoring Parallelized Droplet Microfluidic Production", in Lab on Chip, vol. 16, no. 17, pp. 3210-3219, June 2016, doi: 10.1039/C6LC00693K. (Cover Article)

  107. M. F Farooqui and A. Shamim "Low-Cost Inkjet-Printed Smart Bandage for Wireless Monitoring of Chronic Wounds", in Nature Scientific Reports, vol. 6, pp. 28949-28961, June 2016, doi: 10.1038/srep28949.

  108. S. Kim, A. Shamim, A. Georgiadis, H. Aubert, and M. M. Tentzeris, "Fabrication of Fully Ink-jet Printed Vias and SIW Structures on Thick Polymer Substrates", in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 6, no. 3, pp. 486-496, March 2016, doi: 10.1109/TCPMT.2016.2522461.

  109. M. M. Khan, F. A. Tahir, A. Shamim, and H. M. Cheema, "3.56 bits/cm2 Compact Inkjet-Printed and Application Specific Chipless RFID Tag", in IEEE Antennas and Wireless Propagation Letters, vol. 15, pp. 1109-1112, March 2016, doi: 10.1109/LAWP.2015.2494864.

  110. J. M. Nassar, M. D. Cordero, A. D. Kutbee, M. A. Karimi, G. A. T. Sevilla, A. Hussain, A. Shamim, and M. M Hussain, "Paper Skin Multi-Sensory Platform for Simultaneous Environmental Monitoring", in Advanced Materials Technologies, vol. 1, no. 1, pp. 1600004-1600017, April 2016, doi: 10.1002/admt.201600004.

  111. M. Vaseem, G. McKerricher, and A. Shamim, "Robust Design of a Particle-Free Silver-Organo-Complex Ink with High Conductivity and Inkjet Stability for Flexible Electronics", in ACS Applied Materials and Interfaces, vol. 8, no. 1, pp. 177-186, Dec 2015, doi: 10.1021/acsami.5b08125.

  112. A. M. Hussain, F. A. Ghaffar, Sing I. Park, J. A. Rogers, A. Shamim, and M. M. Hussain, "Metal/Polymer-Based Stretchable Antenna for Constant Frequency Far-Field Communication in Wearable Electronics", in Advanced Functional Materials, vol. 25, no. 42, pp. 6565-6575, Nov. 2015, doi: 10.1002/adfm.201503277 (Cover Article).

  113. M. Sallam, M. Serry, S. Sedky, A, Shamim, and E. Soliman, "Micromachined On-Chip Dielectric Resonator Antenna Operating at 60 GHz," in IEEE Transactions on Antennas & Propagation, vol. 63, no. 8, pp. 3410-3416, Aug. 2015, doi: 10.1109/TAP.2015.2439694.

  114. G. Mckerricher, D. Titterington, and A. Shamim, "A Fully Inkjet-Printed 3D Honeycomb Inspired Patch Antenna," in IEEE Antennas and Wireless Propagation Letters, vol. 15, pp. 544-547, July 2015, doi: 10.1109/LAWP.2015.2457492.

  115. A. Nafe and A. Shamim, "An Integrable SIW Phase Shifter in a Partially Magnetized Ferrite LTCC Package," in IEEE Transactions on Microwave Theory and Techniques, vol. 63, no. 7, pp. 2264-2274, July 2015, doi: 10.1109/TMTT.2015.2436921

  116. F. A. Ghaffar and A. Shamim, "A Partially Magnetized Ferrite LTCC Based SIW Phase Shifter for Phased Array Applications", in IEEE Transactions on Magnetics, vol. 51, no. 6, pp. 4003108-4003115, Feb. 2015, doi: 10.1109/TMAG.2015.2404303

  117. S. Ahmed, F. A. Tahir, A. Shamim, and H. M. Cheema, "A Compact Kapton-Based Inkjet-Printed Multiband Antenna for Flexible Wireless Devices," in IEEE Antenna and Wireless Propagation Letters, vol. 14, pp. 1802-1805, April 2015, doi: 10.1109/LAWP.2015.2424681.

  118. H. Aboutarboush, F. Farooqui, and Atif Shamim, "Inkjet-Printed Wideband Antenna on Resin-Coated Paper Substrate for Curved Wireless Devices," in IEEE Antenna and Wireless Propagation Letters, vol.15, pp. 20-23, April 2015, doi: 10.1109/LAWP.2015.2425797.

  119. M. S. Sharawi, S. Deif, and A. Shamim, "An Electronically Controlled 8-Element Switched Beam Planar Array," in IEEE Antenna and Wireless Propagation Letters, vol. 14, pp. 1350-1353, Feb. 2015, doi: 10.1109/LAWP.2015.2405331.

  120. G. McKerricher, J. Gonzalez, and A. Shamim "Fully Inkjet-Printed RF Inductors and Capacitors using Polymer Dielectric and Silver Conductive Ink with Through Vias", in IEEE Transactions on Electron Devices, vol. 62, no. 3, pp. 1002-1009, Feb. 2015, doi: 10.1109/TED.2015.2396004.

  121. E. Arabi and A. Shamim "The effect of self-heating on the performance of a tunable filter with embedded windings in a Ferrite LTCC Package", in IEEE Transactions on Components, Packaging, and Manufacturing Technology, vol. 5, no. 3, pp. 365-371, Feb. 2015, doi: 10.1109/TCPMT.2015.2393551.

  122. F. A. Ghaffar, and A. Shamim, "A Ferrite LTCC Based Dual Purpose Helical Antenna Providing Bias for Tunability," in IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 831-834, Dec. 2014, doi: 10.1109/LAWP.2014.2382608.

  123. H. Cheema, M. Arsalan, K. N. Salama, and A. Shamim, "A Low-Power 802.11ad Compatible 60 GHz Phase-Locked Loop in 65nm CMOS," in Microwave and Optical Technology Letters, vol. 57, no. 3, pp. 660-667, March 2015, doi: 10.1002/mop.28924.

  124. E. Arabi and A. Shamim "3D RF SoP Technologies: LTCC versus LCP", in Microwave and Optical Technology Letters, vol. 57, no. 2, pp. 434-441, Feb. 2015, doi: 10.1002/mop.28875.

  125. E. Arabi, F. A. Ghaffar, and A. Shamim, "Tunable Bandpass Filter Based on Partially Magnetized Ferrite LTCC with Embedded Windings for SoP Applications", in IEEE Microwave and Wireless Component Letters, vol. 25, no. 1, pp. 16-18, Jan. 2015, doi: 10.1109/LMWC.2014.2365748.

  126. M. F. Farooqui, C. Claudel, and A. Shamim, "An Inkjet-Printed Buoyant 3-D Lagrangian Sensor for Real-Time Flood Monitoring," in IEEE Transactions on Antennas & Propagation, vol. 62, no. 6, pp. 3354-3359, June 2014, doi: 10.1109/TAP.2014.2309957.

  127. M. N. Gadalla, M. Abdel-Rahman, and A. Shamim, "Design, Optimization and fabrication of a 28.3 THz Nano-Rectenna for Infrared detection and rectification," in Nature Sci. Rep., vol. 4, pp. 4270-4278, March 2014, doi: 10.1038/srep04270.

  128. F. A. Ghaffar, J. R. Bray, and A. Shamim, "Theory and Design of a Tunable Antenna on a Partially Magnetized Ferrite LTCC Substrate," in IEEE Transactions on Antennas & Propagation, vol. 62, no. 3, pp. 1238-1245, March 2014, 10.1109/TAP.2013.2295833..

  129. H. Aboutarboush and A. Shamim, "A Wide Frequency Independently Controlled Dual-Band Inkjet-Printed Antenna," in IET Microwaves, Antennas & Propagation, vol. 8, no. 1 pp. 52-56, Jan. 2014, doi: 10.1049/iet-map.2013.0229.

  130. E. Arabi, M. Lahti, T. Vähä-Heikkilä, and A. Shamim, "A 3D Miniaturized High selectivity Bandpass filter in LTCC Technology", in IEEE Microwave and Wireless Component Letters, vol. 24, no. 1, pp. 8-10, Jan. 2014, doi: 10.1109/LMWC.2013.2285285.

  131. K. Hayat, H. M. Cheema, and A. Shamim, "Potential of Carbon Nanotube Field-Effect Transistors for Analogue Circuits," in IET Journal of Engineering, vol. 2013, no. 11, pp. 70-76, Nov. 2013, doi: 10.1049/joe.2013.0067.

  132. E. Arabi and A. Shamim, "3D Lumped Components and Miniaturized Bandpass Filter in an ultra-thin M-LCP for SoP Applications," in Progress In Electromagnetics Research C, vol. 44, pp. 197-210, Oct. 2013, doi: 10.2528/PIERC13090903.

  133. M. H. Ouda, M. Arsalan, L. Marnat, A. Shamim, and K. N. Salama, "5.2-GHz RF Power Harvesting Module in 0.18 μm CMOS for Biomedical Implantable Sensors," in IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 5, pp. 2177-2184, April 2013, doi: 10.1109/TMTT.2013.2255621.

  134. L. Marnat, A. A. A. Carreno, D. Conchouso, M. G. Martinez, I. G. Foulds, and A. Shamim, "New Movable Plate for Efficient Millimeter Wave Vertical on-Chip Antennas," in IEEE Transactions on Antennas and Propagation, vol. 61, no. 4, pp. 1608-1615, April 2013, doi: 10.1109/TAP.2013.2241720.

  135. B. cook and A. Shamim, "Utilizing Wideband AMC Structures for High Gain Inkjet-Printed Antennas on Lossy Paper Substrate," in IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 76-79, Jan. 2013, doi: 10.1109/LAWP.2013.2240251.

  136. L. Marnat, M. H. Ouda, M. Arsalan, K. Salama, and A. Shamim, "On-chip implantable antennas for wireless power and data transfer in a glaucoma monitoring SoC," in IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 1671-1674, Jan. 2013, doi: 10.1109/LAWP.2013.2240253.

  137. H. M. Cheema and A. Shamim, "The Last Barrier: On-Chip Antennas," in IEEE Microwave Magazine, vol. 14, no. 1, pp. 79-81, Jan. 2013, doi: 10.1109/MMM.2012.2226542. (Amongst Top 10 downloaded papers in 2013).

  138. F. A. Ghaffar and A. Shamim, "Design of silicon-based fractal antennas," in Microwave Optical Technology Letters, vol. 55, no. 1, pp. 180-185, Jan. 2013, doi: 10.1002/mop.27245

  139. H. Abutarboush and A. Shamim, "Paper-Based Inkjet-Printed Tri-Band U-Slot Monopole Antenna for Wireless Applications," in IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 1234-1237, Oct. 2012, doi: 10.1109/LAWP.2012.2223751.

  140. B. S. Cook, A. Shamim, and M. M. Tentzeris, "A Passive Low-Cost Inkjet-Printed Smart Skin Sensor for Structural Health Monitoring," in IET Microwaves Antennas and Propagation, vol. 6, no. 14, pp. 1536-1541, Sep. 2012, doi: 10.1049/iet-map.2012.0188.

  141. A. R. Maza, B. S. Cook, J. Ghassan, and A. Shamim, "Paper-Based Inkjet-Printed UWB Fractal Antennas," in IET Microwaves Antennas and Propagation, vol. 6, no. 12, pp. 1366-1373, Sep. 2012, doi: 10.1049/iet-map.2012.0243.

  142. B. S. Cook and A. Shamim, "Inkjet Printing of Novel Wideband and High Gain Antennas on Low-Cost Paper Substrate," in IEEE Transactions on Antennas and Propagation, 60, no. 9, pp. 4148-4156, Sep. 2012, doi: 10.1109/TAP.2012.2207079.

  143. M. Arsalan, A. Shamim, N. G. Tarr, and L. Roy, "Ultra-Low Power CMOS based Sensor for On-body Radiation Dose Measurements," in IEEE Journal on Emerging and Selected Topics in Circuits and Systems, vol. 2, no. 1, pp. 34-41, March 2012, doi: 10.1109/JETCAS.2012.2187404.

  144. A. Shamim, M. Arsalan, N. Hojjat, and L. Roy, "5 GHz LTCC-Based Aperture Coupled Wireless Transmitter for System-on-Package Applications," in Progress in Electromagnetic Research C, vol. 25, pp. 159-178, Nov. 2012, doi: 10.2528/PIERC11092004

  145. F. A. Ghaffar, M. U. Khalid, K. N. Salama, and A. Shamim, "24 GHz LTCC Fractal Antenna Array SoP with Integrated Fresnel Lens", in IEEE Antennas and Wireless Propagation Letter, vol. 10, pp. 705-708, July 2011, doi: 10.1109/LAWP.2011.216

  146. A. Shamim, J. Bray, N. Hojjat, and L. Roy, "Ferrite LTCC Based Antennas for Tunable SoP Applications," in IEEE Transactions on Advanced Packaging, vol. 1, no. 7, pp. 999-1006, July 2011, doi: 10.1109/TCPMT.2011.2143411.

  147. F. A. Ghaffar, A. Shamim, M. K. Mobeen, T. Y. AlNafouri, and K. N. Salama, "A Compact QPSK Modulator with Low Amplitude and Phase Imbalance for Remote Sensing Applications," Canadian Journal on Electrical and Electronics Engineering, Vol. 2, No. 4, April 2011.

  148. A. Shamim, A. G. Radwan, and K. N. Salama, "Fractional Smith Chart Theory and Application," in IEEE Microwave and Wireless Components Letters, vol. 21, no. 3, pp. 117-119, March 2011, doi: 10.1109/LMWC.2010.2098861.

  149. A. G. Radwan, A. Shamim, and K. N. Salama, "Theory of Fractional Order Elements Based Impedance Matching Networks," in IEEE Microwave and Wireless Components Letters, vol. 21, no. 3, pp. 120-122, March 2011, doi: 10.1109/LMWC.2010.2103051.

  150. M. Arsalan, A. Shamim, L. Roy, and M. Shams, "A Fully Differential Monolithic LNA with On-chip Antenna for a Short Range Wireless Receiver," in IEEE Microwave Wireless Components Letter, vol. 19, no. 10, pp. 674-676, Oct. 2009, doi: ier10.1109/LMWC.2009.202.

  151. A. Shamim, M. Arsalan, L. Roy, and G.Tarr, "Wireless Dosimeter: System on Chip versus System in Package for Biomedical and Space Applications," in IEEE Transactions on Circuits & Systems II, vol. 55, no. 7, pp. 643-647, July 2008, doi: 10.1109/TCSII.2008.92157.

  152. P. Popplewell, V. Karam, A. Shamim, J. Rogers, L. Roy, and C. Plett, "A 5.2-GHz BFSK Transceiver Using Injection-Locking and an On-Chip Antenna", in IEEE Journal of Solid-State Circuits, vol. 43, no. 4, pp. 981-990, April 2008, doi: 10.1109/JSSC.2008.917516

  153. A. Shamim, N. Fong, L. Roy, and G. Tarr, "24 GHz On-Chip Antennas and Balun on Bulk Si for Air Transmission," in IEEE Transactions on Antennas & Propagation, vol. 56, no. 2, pp. 303-311, Feb. 2008, doi: 10.1109/TAP.2007.915421 

View IMPACTS Journal Articles.