embedded systems

Serine Medjber

Visiting student at King Abdullah University of Science and Technology (KAUST) under the supervision of Mr. Tareq Al-Naffouri

Mohammed Amine Labbbas

Visiting student at King Abdullah University of Science and Technology (KAUST) under the supervision of Mr. Tareq Al-Naffouri
Syed Abidullah Fareed

Syed Abidullah Fareed

Visiting Student (former), Information Science Lab

Vehicle Intrusion Resilience Systems in Action

A modern vehicle is composed of around 100 Electronic Control Unit (ECU) connected via several types of networks. An ECU is an embedded device, similar to a RaspberryPI, running an operating system, e.g., Linux-based or real-time OS, on top of which different software and firmware may run, depending on the application. Due to the imperfection of humans, software can have faults and intrusions, which can lead to catastrophic failures that threatens human lives. A Fault and Intrusion Resilient System (FIRS) is a vehicle middleware that can mask the effect of a failure or intrusion. Contrary to

Additively Manufactured Conformal Microwave Sensors for Applications in Oil Industry

-

B3 L5 R5220

Modern industries are adapting smart ways of monitoring their processes to ensure smooth operations. Sensors capable of early detection of a problem are becoming the norm in industrial processes. This is key to the development of the “Internet of Things” (IoT), in which billions of interconnected devices will work together to make smart decisions. Sensors that can detect and communicate the process information are essential ingredients of any IoT-enabled network. Since billions of such sensor nodes will be required in the future, the low cost will be an important feature for these devices. Consistent with the above-mentioned trends, the oil industry is also adapting smart monitoring and actuation mechanisms for its day-to-day operations. This thesis is focused on developing low-cost sensors, which can increase oil production efficiency through real-time monitoring of oil wells and also help in the safe transport of oil products from the wells to the refineries.

Muhammad Akram Karimi secures 3rd prize Best Paper Award at IMS - world's most prestigious microwaves conference

1 min read ·
Karimi's work on low cost and zero weight water-cut sensors stood out for its quality and distinctive application-direct approach. Successfully, he proved cost reductions of 100 times lower and dropping weight to 1,000 times below than the ones currently available in the market.

Ph.D. student Muhammad Akram Karimimi among Best Paper Award finalists

1 min read ·
Ph.D. student Muhammad Akram Karimimi from the research team of Atif Shamim, Assistant Professor of Electrical Engineering at KAUST and Director of IMPACT Laboratory, was one of the finalists in the Student Paper Competition at the International Microwave Symposium held in San Francisco, California, in May 2016.

CEMSE Students: Muhammad Akram Karimi

1 min read ·
Muhammad Akram Karimi describes himself as an inquisitive-minded researcher who loves to solve industrial challenges through science and technology. Karimi is a third-year Ph.D. student working in the Integrated Microwaves Packaging Antennas & Circuits Technology (IMPACT) Lab under the supervision of Professor Atif Shamim. His current research focus is on the design of low-cost and printed microwave sensors for various industrial applications, with a prime focus on the oil industry.

KAUST student wins global sensors and measurement systems competition

1 min read ·
KAUST master's degree student José Ilton de Oliveira Filho recently won first place at the second edition of the IEEE International Sensors and Measurement Systems Student Contest (IEEE IS&M-SC). IEEE IS&M-SC is a global competition directed at teams of advanced undergraduates, master's degree and Ph.D. students and seeks to stimulate creative ideas for sensor and measuring systems applications.

Meet KAUST new student: Ioannis Zografopoulos

1 min read ·
Ioannis Zografopoulos is a Ph.D. student who joined KAUST this fall as a Ph.D. candidate and member of the Secure Next Generation Resilient Systems (SENTRY) Lab under the supervision of Professor Charalambos Konstantinou. Zografopoulos believes that KAUST's renowned faculty, global reputation and research infrastructure make the University the ideal environment for him to develop high-quality, impactful research.

Yuxiang Liu

PhD candidate in the Networking Research Lab(NETLAB) at King Abdullah University of Science and Technology.

Yousif Aldolaijan

Yousif Aldolaijan was a Computer Science Master student under the supervision of Prof. Ivan Viola at the Visual Computing Center (VCC) at King Abdullah University of Science and Technology (KAUST). Education and Early Career Yousif received his bachelor’s degree in Computer Science at the University of Southern California (USC), Los Angeles, USA in 2018. He joined KAUST to continue his studies in Computer Science and received his Master's degree in Computer Science from KAUST in 2020. During the summer of 2018, he joined Google as a Software Engineering Intern for three months. He worked on

Salman Sarfaraz Ghori

Education 2021.10 - Present Ph.D. Student in Electrical and Computer Engg, King Abdullah University of Science and Technology, KSA 2018.09 - 2020.10 M.S in Aerospace Engg, Sapienza University of Rome, Italy ​2009.05 - 2013.05 B.Tech in Electronics and Communication Engg, Jawaharlal Nehru Technological University HYD, India Professional Profile 2018.01 - 2018.09 Senior Engineer, ZF India Technology Center, India 2017.02 - 2018.01 Embedded Software Engineer, Global Edge, India 2014.09 - 2017.01 System Engineer, Tata Consultancy Services, India Areas of Expertise and Research Interests Space

Muhammad Akram Karimi

Muhammad Akram Karimi obtained his Ph.D. degree in Electrical Engineering under the supervision of Professor Atif Shamim at Integrated Microwaves Packaging Antennas & Circuit Technology (IMPACT) Research Group at King Abdullah University of Science and Technology (KAUST). Research Interest Muhammad's research interests included the Design of Cost-Effective and robust Fluidic Sensors to characterize fluids (esp. Crude Oil) and Energy Harvesting. Selected Publications ​Journal : M. A. Karimi, M Arsalan and A. Shamim, "Low cost and pipe conformable microwave-based water cut sensor", IEEE Sensors

Mohammed Abdullah Hussaini

Senior Embedded System Engineer at KAUST (King Abdullah University of Science and Technology)

Moetaz Abbas

Research Engineer, Computer Science
Moetaz Abbas was an Optoelectronic Engineer in the Computational Imaging Group (VCCIMAGING) working with Professor Wolfgang Heidrich at King Abdullah University of Science and Technology (KAUST). Education and Early Career Moetaz obtained his bachelor degree in Electronics Engineering from The American University in Cairo (AUC) in Egypt in 2010. By 2011, he received his master degree in Computer Science from King Abdullah University of Science and Technology (KAUST) in Saudi Arabia. After his masters, he returned back to The American University in Cairo (AUC) as a teaching assistant for the

Jose Ilton De Oliveira Filho

Postdoctoral Research Fellow, Electrical and Computer Engineering
José Ilton is currently a Postdoctoral Fellow in the Electrical and Computer Engineering program, at King Abdullah University of Science and Technology (KAUST). José is focused on instrumentation, prototyping, and communication theory. Education and Early Career José Ilton did his bachelor’s in electrical engineering on the track of Power Systems at Federal University of Piaui with 1.5-year exchange period at Budapest University of Technology and Economics, in 2015. At King Abdullah University of Science and Technology (KAUST) he did his master’s in electrical engineering on the topic of

Ioannis (Yannis) Zografopoulos

Ioannis Zografopoulos received his Ph.D. at the Computer, Electrical, and Mathematical Sciences and Engineering Division (CEMSE) of King Abdullah University of Science and Technology (KAUST) in 2023. Prior, he graduated with a B.Eng. and M.Eng. degrees in Computer, Communications, and Network Engineering, and an M.Sc. degree in Electrical and Computer Engineering from the University of Thessaly, Volos, Greece, in 2014 and 2015, respectively. His research interests include cyber-physical systems security, with an emphasis on embedded systems for industrial, distributed energy, and power grid

Hasan Albinsaid

Hasan Albinsaid is a Ph.D. student under the supervision of Prof. Mohamed-Slim Alouini at the Communication Theory Lab (CTL) in King Abdullah University of Science and Technology (KAUST). Education and Early Career Hasan received his B.Eng. degree in Electronic Engineering from Universitas Brawijaya (UB), Indonesia, in 2018 and his M.Sc. degree in Telecommunication Engineering from National Sun Yat-Sen University (NSYSU), Taiwan, in 2020. After that, he worked as a Research Assistant at the Institute of Communications Engineering, NSYSU, Taiwan. Currently, he is pursuing a Ph.D. in Electrical

Fellipe Augusto Araújo Leandro

Fellipe received his bachelor degree in Electrical Engineering from Federal University of Rio Grande do Norte (UFRN), Brazil, in 2019. During his undergraduation, he worked in researches related to microcontroller-based embedded systems platforms, with focus in embedded software programming and PCB design. In 2019, he worked as an intern in a startup company developing embedded software for a Lora-based biotelemetry system, and also in another startup developing PCB design for low-cost Educational robotics and electronics. In 2020, he joined KAUST to research under the supervision of Professor

Evangelos Piliouras

Education and early career Evangelos received his integrated master's degree with excellency, from the department of Electrical Engineering and Computer Technology in Patras in 2018. He recently joined King Abdullah University of Science and Technology (KAUST) and he works under the supervision of Prof. Meriem Laleg in the field of estimation. Evangelos did a 3-month internship in Dialog Semiconductor as a software developer, having developed a software automation tool. Research Interests Evangelos' research interests are found in the area of biosensors, embedded system design, modeling and

Christos Sapsanis

Education Profile : - Ph.D. Candidate, Electrical and Computer Engineering, Johns Hopkins University, Baltimore, MD, USA. - M.Sc., Electrical Engineering (Electrophysics), King Abdullah University of Science and Technology, Thuwal, Saudi Arabia, 2015. - B.Sc., Electrical and Computer Engineering, University of Patras, Greece, 2013. Introduction: Christos Sapsanis obtained his M.Sc. Degree in the Electrical Engineering (EE) Program from King Abdullah University of Science and Technology, under the supervision of Prof. Khaled Nabil Salama. Before joining KAUST, he earned his B.Sc. in Electrical

Charalambos (Harrys) Konstantinou

Professor Konstantinou is an expert in critical infrastructure security and resilience, focusing on smart grid technology, renewable energy integration and real-time simulation.

Ahmed Eltawil

Professor Eltawil is an expert in wireless communication system design with an established history of university-industry collaboration. He continues to act as an adviser in developing wireless systems for leading international companies.

Abdullah Al-Nafisah

Master student at the Information Science Lab (ISL), in the Electrical Engineering Department, CEMSE, King Abdullah University of Science and Technology (KAUST).