nanofabrication

Fei Xiang

Study of ultraviolet AlGaN nanowires light-emitting diodes

-

B3 L5 R5209

Ultraviolet (UV) group III-Nitride-based light emitters have been used in various applications such as water purification, medicine, lighting and chemical detection. Despite attractive properties such as bandgap tunability in the whole UV range (UV-C to UV-A), high chemical stability and relative low cost, the low quantum efficiency hamper the full utilization. This thesis aims to show alternative solutions to such problems by employing nanowires (NWs) structures, and target the eventual application of reliable and high power NWs-based light-emitting devices, enabling large-scale production using the established silicon foundry processes. Here, we present the improvement of injection current and optical power of AlGaN NWs LEDs by involving a metal bilayer thin film with a dual purpose: eliminate the potential barrier for carrier transport, and inhibit the formation of silicide.

Liquid Metal-Based Inertial Sensors for Motion Monitoring and Human Machine Interfaces

-

B2 B3 A0215

In this dissertation, the development of novel practical resistive and capacitive-type inertial sensors using liquid metal as a functional proof mass material is presented. Utilizing the unique electromechanical properties of liquid metal, the novel inertial sensor design confines a graphene-coated liquid metal droplet inside tubular and 3D architectures, enabling motion sensing in single and multiple directions. Combining the graphene-coated liquid metal droplet with printed sensing elements offers a robust fatigue-free alternative material for rigid, proof mass-based accelerometers. Resistive and capacitive sensing mechanisms were both developed, characterized, and evaluated. Emerging rapid fabrication technologies such as direct laser writing and 3D printing were mainly adopted, offering a scalable fabrication strategy independent of advanced microfabrication facilities. The developed inertial sensor was integrated with a programmable system on a chip (PSoC) to function as a stand-alone system and demonstrate its application for real-time- monitoring of human health/ physical activity and for soft human-machine interfaces. The developed inertial sensor architecture and materials in this work offer a new paradigm for manufacturing these widely used sensors that have the potential to complement the performance of their silicon counterparts and extend their applications.

KAUST PhD: UC Berkeley Best Research Award 2014

1 min read ·
KAUST CEMSE/EE graduate Dr. Hossain Fahad has just received the Best Research Award among 150 UC Berkeley research scientists, post-docs and graduate students.

PhD Student Hanan Mohammed wins PATW Competition

1 min read ·
Student wins the IET Saudi Arabia Young Professionals PATW Competition 2014/15.

CEMSE student gets Best Paper Award at 2DFDU2016

1 min read ·
CEMSE student Chun-Ho Lin won the Best Paper Award at the 2nd International Symposium on Devices and Application of Two-dimensional Materials (2016), held in Shanghai on June 20, 2016.

Crafting technology from nature's darkest secrets

1 min read ·
Exploiting the properties of disordered chaotic systems leads to low-cost energy harvesting and innovative micro-surgery applications.

Conducting Fab lessons in a virtual clean room

1 min read ·
A virtual platform makes learning how to fabricate a semiconductor device easier, safer and more interactive.

Meet KAUST prospective student: Dhanu Chettri

1 min read ·
Dhanu Chettri holds a master’s degree in electronic and communication engineering from Manipur University, India. Before joining KAUST, he worked as a senior project fellow at Council of Scientific and Industrial Research-Central Electronics Engineering Research Institute (CSIR-CEERI). Dhanu will join KAUST this fall as a Ph.D. candidate and member of the Advanced Semiconductor Laboratory under the supervision of Professor Xiaohang Li.

Smart memory devices that can sense

1 min read ·
In-memory sensing technology will facilitate electronic systems that are faster, smaller and consume less energy.

Ditching sensors for streamlined control of microdevices

1 min read ·
Hossein Fariborzi's team has developed a novel miniature microelectromechanical device that avoids the need to use sensors and has significant potential for use in industrial or medical applications.

Wedyan Babatain

Wedyan Babatain is a doctoral candidate of MMH Labs in the Electrical Engineering program at KAUST. She has an interdisciplinary background obtaining her bachelor's degree in Biomedical Engineering from the University of Delaware, USA, in 2017, and her master's degree in Electrical Engineering from King Abdullah University of Science and Technology (KAUST), KSA, in 2019. Her research interests include sensors, actuators, microfluidics, and flexible and soft electronics for healthcare and environmental applications. She was a finalist at the 2022 SXSW Innovation Awards and has presented her

Hossain Fahad

Hossain Fahad received both, his Master's and Ph.D. Degree in Electrical Engineering from King Abdullah University of Science and Technology (KAUST) under the supervision of Prof. Muhammad Mustafa Hussain. He is currently a post-doctoral researcher leading sensors research Prof. Ali Javey`s lab at EECS, UC Berkeley. He has authored more than 20 journal publications and his expertise is in the advanced device and sensor technology. Fahad is proficient in epitaxy, chemical vapor deposition, physical vapor deposition (sputtering and evaporation), atomic layer deposition, lithography, reactive ion

Hanan Mohammed

​ Hanan Mohammed obtained her Ph.D. in Electrical Engineering at the King Abdullah University of Science and Technology (KAUST) under the supervision of Prof. Jurgen Kosel. Education Profile Ph.D., Electrical Engineering, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia 2018. M.Sc, Nanoscale Science & Technology, University of Leeds, United Kingdom 2012. B.Sc, Physics, University of Calicut, Kerala, India, 2010. Selected Publications Mohammed, Hanan, et al. "Magnetotransport measurements of domain wall propagation in individual multisegmented cylindrical nanowires."

Hadi Amata

Hadi Amata is a Research Scientist in the Computational Imaging Group (VCCIMAGING) working with Professor Wolfgang Heidrich at King Abdullah University of Science and Technology (KAUST). Education and Early Career Dr. Amata received his master degree in Electronics/Microelectronics from Provence University in France in 2008. He obtained a doctoral in Electrical Engineering “Optics and Photonics” from Jean Monnet University of Saint Etienne in France in 2012. He started his career life as a teaching assistant at Saint-Étienne Institute of Technology (IUT) in 2010. He was also a teaching

Dante Serrano Kobylyansky

Dante Serrano Kobylyansky is an MS student in Electrical and Computer Engineering at King Abdullah University of Science and Technology (KAUST), conducting research within the Integrated Microwaves Packaging Antennas & Circuit Technology Research Group under the supervision of Professor Atif Shamim. Educational Profile Dante obtained his bachelor's degree in Nanotechnology from the National Autonomous University of Mexico in June 2023. He joined KAUST as an Electrical and Computer Engineering student with the Integrated Microwaves Packaging Antennas & Circuit Technology (IMPACT) Research Group

Davide Priante

Davide Priante obtained his Ph.D. and Master's degree in Electrical Engineering under the supervision of Professor Boon Ooi at King Abdullah University of Science and Technology (KAUST). Davide received his B.Sc. degree in Material Science Engineering from the University of Padova, Italy, in 2013. He joined KAUST in February 2014 as an M.S. to a Ph.D. student in Photonics Laboratory in the Computer, Electrical, and Mathematical Sciences & Engineering (CEMSE) Division. He received his MSc degree in August 2015 with a thesis based on the recombination mechanism of CH3NH3PbBr3 perovskite. Davide

Chun-Ho Lin

Chun-Ho Lin obtained his Ph.D. in Electrical Engineering from King Abdullah University of Science and Technology (KAUST) under the supervision of Prof. Jr-Hau He in 2018. Lin completed his master’s degree in the Department of Electrical Engineering from the National Taiwan University and began his Ph.D. studies at KAUST in 2014. Research Interest Chun-Ho Lin's research interests include Perovskites, Nanophotonics, Flexible Electronics, Paper device, and 2D Materials.